Cabinet refinishing can save you a lot of money on a bathroom or kitchen upgrade. To ensure you are satisfied, here are some tips for cabinet refinishing in Freehold, NJ.
Sand and Prep All Surfaces
The key to a successful cabinet refinishing project lies in thorough surface preparation. Begin by taking off the hardware and the cabinet door. After that, sand all surfaces using medium-grit sandpaper to remove all the finishing coating, dirt, or blemishes. These usually harbor insect populations, so you must pay close attention to them and do a meticulous cleaning job. Finish sanding and immediately use the tack cloth to wipe down the dusted surfaces.
Clean Everything
Before applying any finish, you should be sure the cabinets are as clean as possible to remove stains like grease, grime, and residues, which negatively affect the new finish application and durability. Use water carefully and dry thoroughly after every rinse before embarking on the refinishing process. Additionally, a clean surface allows the finish to stick immediately, creating no visible blemishes.
Apply the Finishes
When you are done sanding, prepping, and cleaning the cabinet, you will apply the finishes as the next step. Commence by using a primer appropriate for the cabinets and waxed you’ll be putting on it. Let dry the primer before applying several coats of paint or stain you’ve chosen, always considering the waiting time between each, based on the manufacturers’ recommendation. Take care of the proper painting technique as well.
Contact VAN GO PAINTING at tryvango.com for more tips on cabinet refinishing in Freehold, NJ.
