When winter approaches many home owners may start to think about their furnace and the type of shape it is in. Having a furnace in good working order is important to keep a home warm when the temperatures outside begin to cool off. Because of this, they may suddenly realize that having their unit inspected and maintained might be a good task to have done. In such cases, calling a furnace repair company can be a good option.
Most repair companies will be able to send out a qualified repair person who can quickly get to work on the unit to make sure it is ready for the cold winter season. A technician will generally need to spend some time checking the unit over and they may start with the thermostat to ensure it is reading the temperatures correctly in the home. This is important as the thermostat controls when the unit comes on and goes off so having it calibrated to the correct temperature can be an important step.
The professional from a furnace repair company in Toledo OH will also spend time examining the condition of the flames when the heat is switched on. The flames of the burner should be blue and steady if the burner is in good condition. If flames are flickering and red or orange, then the burner is most likely dirty and the technician will need to spend a considerable amount of time disassembling it and cleaning all of the numerous parts of the element. While this is time consuming, it is important to ensure the burner heats thoroughly and evenly as well.
The blower unit of the system will also need to be inspected. This unit can be very dirty and the technician may need to vacuum it clean first. Most units have an air filter, which should be checked and replaced if necessary. The motor of the unit should be examined and any damaged or loose wires will need to be replaced or fixed. Oil should be added to the oil ports on the motor if they are present. Finally, the fan and fan belt should be looked at and replaced if either shows signs of damage or deterioration.
Having these simple repair tasks completed can be key in making sure the system is not only ready for winter but will operate as cost efficiently as possible.
