Regular transmission maintenance is essential to the continued smooth and efficient operation of your vehicle. During a routine checkup, a transmission repair professional performs various tasks to ensure that all internal components are adequately lubricated and are functioning correctly. Putting the car up on a lift allows for a more detailed inspection, including the replacement of filters, fluids and gaskets.
You should have your transmission serviced every two years or 30,000 miles. A complete flush is only needed if you’ve gone too long between maintenance appointments. Significant grime buildup and burnt transmission fluid indicate the need for a flush, but if your transmission has been properly maintained, a simple fluid replacement is enough. Below, you’ll learn what happens during routine transmission repair in Burnsville, MN.
Pan Gasket Replacement
The first step in routine service is to remove and replace the pan gasket, which is located around the rim of the transmission’s pan. Over time, these gaskets get cracked and worn, causing fluid leaks. Transmission fluid loss can cause improper shifting and eventual failure. Pan gasket replacement is a simple job, and the part is usually inexpensive.
General Cleaning
Built-up grime, dirt and fluid can cause major transmission problems, and cleanup is a vital part of Transmission Repair in Burnsville, MN. All parts (the pan, gasket, case, sealing surface and exhaust system) should be cleaned of built-up fluid and debris.
Filter Replacement
In most cases, the transmission seal and filter will also need replacement. A dirty or clogged filter can cause extreme stress on your transmission, but filter replacement is often overlooked. The transmission filter, like the pan gasket, is an easy and inexpensive repair for a professional.
Fluid Replacement
Most of the transmission’s fluid is removed during the gasket and filter replacement process, and the final step in routine maintenance is to refill the fluid to the factory’s specified level. Most transmissions are filled through the dipstick tube (usually found close to the engine), and filling is only done after necessary repairs have been made. Aamco Transmission in Burnsville, MN will follow the car manufacturer’s guidelines when choosing replacement fluid for your vehicle.
